Warning: Trying to access array offset on value of type bool in /home/xsu3811/public_html/wp/wp-content/themes/the-thor/inc/seo/description_robots.php on line 42

Warning: Trying to access array offset on value of type bool in /home/xsu3811/public_html/wp/wp-content/themes/the-thor/inc/seo/description_robots.php on line 42
CATEGORY

Weaving technology

  • 2021年1月8日

[AJL] Weft insertion trouble loop ③

③Caused by the thread ・Is the timing of the frame closing time wrong? In the case of the mechanical type, the timing may be out of order if the gear is engaged due to deterioration over time. In the c […]

  • 2020年12月8日

[AJL] Weft insertion trouble loop ②

② When the cause is poor opening of the warp ・If the fluffing is insufficient due to poor sizing, or if there is no glue, the warp threads may stick to each other due to the fluff, resulting in poor o […]

  • 2020年12月4日

[AJL] Weft insertion trouble loop ①

① Check the tension of the warp at the weft entrance of the woven fabric Basically, the weft is caught in the warp at the start of the fabric and this trouble occurs. ・First, check if there is any mis […]

  • 2020年11月26日

About the frame height of the loom

Optimal height The frame height of the loom is set to the standard height set by the manufacturer before delivery. However, depending on the woven fabric structure, it may be more convenient for weavi […]

  • 2020年11月9日

Calculation method for reed selection

The required reed differs depending on the fabric We will show you how to calculate how many reeds you need in 1 inch to weave the fabric. The standard for woven fabrics is basically determined by the […]

  • 2020年11月6日

About warp defects (human mistake)

The following three organizations will be explained as examples. Basically, put each organization in one of the reeds. There are exceptions, for example, in plain weave, sometimes one thread is insert […]