- 2020ǯ114
Difference in AJL reed
Difference point The left side of the above figure is a side view of the reed used in a normal air jet loom. The right side of the above figure is the latest reed for Toyota Industries, which is calle […]
CATEGORY
Textile Engineering Department
- 2020ǯ1029
Woven fabric suitable for each relaxation device
Function of positive relaxation device(Plain weave only) I mentioned the role of the relaxation device in a previous article, but each relaxation device has a suitable textile structure. Positive rela […]
- 2020ǯ1026
Weave width may change over time
When does weave width change? First of all, the things that change with time are temperature and humidity. If the temperature and humidity are not controlled, the temperature and humidity may differ b […]
- 2020ǯ1015
loom’s Reed angle
Angle Definition To adjust the loom, it is necessary to proceed based on the angle of the reed. The upper left of the above figure is expressed as an angle of 0 or 360 . At this time, the reed comes […]
- 2020ǯ1012
Function of positive relaxation device(Plain weave only)
Relationship between opening and relaxation device If there is no positive relaxation device Tension is applied to the string when it is opened, but the tension applied to the string is loosened when […]
- 2020ǯ108
[AJL] Sub-nozzle form
Many sub-nozzle form The figure above summarizes the process of improving the sub-nozzle. The ɥơѹ is the reverse taper sub-nozzle that was taken up last time. Placement and injection angle Fro […]
- 2020ǯ107
[AJL] Sub-nozzle form
Many sub-nozzle form sub-nozzle form is has changed significantly compared to the past and the present. Let’s look back on the sub nozzle form change history! Single hole sub-nozzle Sub-nozzle […]