To adjust the loom, it is necessary to proceed based on the angle of the reed.
The upper left of the above figure is expressed as an angle of 0 ° or 360 °.
At this time, the reed comes out in the forefront.
Next, the lower right is expressed as an angle of 180 °.
At this time, the reed is at the back.
The timing of the frame and reed is also linked
The frame moves up and down according to the angle, and the warp strings move up and down along with frame.
By the way, if you change the timing of the warp up and down with respect to the angle,
Higher density fabrics can be woven and the texture of the fabric can be adjusted.