[AJL] Weft insertion trouble Short pick long pick ②

② Wear check around the solenoid pin

Guide bush wear

If it is worn, it will hinder the movement of the pin.
At first glance, it may be judged that it is hindering, but if it cannot be judged, it is judged from the degree of pin wobbling.

Internal cushioning material wear

Dust from wear may be blocking movement.
You won’t know unless you disassemble it.

Wear of the pin

The pin may be worn against the measuring length band.
If the pins are not integrated, the joints may be loose or dislodged.

to TOP